What an HVAC maintenance agreement is and why it pays
An HVAC maintenance agreement is a contract where the customer pays a monthly or yearly fee and you perform scheduled tune-ups, usually one cooling visit in spring and one heating visit in fall. Most plans add perks such as priority scheduling and a repair discount. Price it so the visits at least cover their own cost, and treat the repairs and replacements that come from those visits as the profit.
The value to your shop is simple. Agreements fill the schedule in the slow months, they put a tech in front of aging equipment twice a year, and they give you a customer list you can count on. A shop with 500 members has 1,000 visits on the calendar before it spends a dollar on ads.
If you are a homeowner reading this, the outline below also tells you what a fair HVAC maintenance plan should spell out before you sign.
What to include in the visits
ENERGY STAR publishes a maintenance checklist that makes a good base for your own. It recommends a pre-season check-up each year, cooling in spring and heating in fall. A contractor check-up on that list covers:
- Check thermostat settings
- Tighten electrical connections and measure voltage and current on motors
- Lubricate moving parts
- Inspect the condensate drain
- Check system controls and the startup cycle
- Cooling: clean evaporator and condenser coils, check refrigerant level, clean and adjust blower components
- Heating: check gas or oil connections, gas pressure, burner combustion and the heat exchanger
The same page tells homeowners to inspect, clean or change filters monthly. Decide whether your plan includes filters, and say so in writing either way.
How to price an HVAC maintenance agreement
Start with cost, add margin, then check it against what your market will pay. The numbers below are an example only. Use your own.
| Line | Example |
|---|---|
| Tech time per visit, including drive | 1.5 hours |
| Loaded labor cost per hour (wage, taxes, benefits, truck) | $55 |
| Labor cost per visit | $82.50 |
| Materials per visit (filter, drain tabs, cleaner) | $12 |
| Cost per visit | $94.50 |
| Two visits per year | $189 |
| Office and billing cost per member per year | $15 |
| Total cost to serve one system | $204 |
| Example price at $19 per month | $228 per year |
In this example the plan itself clears $24 a year. That is thin, and it is fine, because the plan's job is to keep the customer and find work. Track three numbers per member: repair revenue found on tune-ups, replacement leads flagged, and renewal rate. Those tell you what a member is worth.
Pricing choices to make:
- Monthly or annual. Monthly billing on a card is easier to say yes to and renews without a phone call. Annual prepay gives you cash up front. Offer both.
- Per system. Charge for the first system and a lower add-on price for each extra system at the same address.
- Tiers. Two tiers are enough. A basic plan with two tune-ups, and a premium plan that adds a bigger repair discount, no after-hours fee and filters.
- Repair discount. Pick a percentage you can afford on every job. A discount you resent giving will get skipped by your own staff.
HVAC maintenance agreement template outline
Keep the agreement to one or two pages in plain language. This outline lists what it should contain. It is a starting point for your own document. Contract rules, including automatic renewal and cancellation rules, differ by state, so have your own attorney review the terms before you use them.
- Parties and property. Your company name, license number, address and phone. Customer name, service address, phone and email.
- Covered equipment. Each system by type, brand, model, serial number and location. State that only listed equipment is covered.
- Term. Start date, length (for example 12 months), and the number of visits included.
- Services included. The tune-up checklist for cooling and for heating. Attach it as a page.
- Member benefits. Priority scheduling, repair discount percentage, diagnostic fee waiver or reduction, after-hours fee terms, any filter or parts allowance.
- What is not included. Repairs, parts, refrigerant, duct cleaning, equipment replacement, damage from misuse, weather or other trades. Say plainly that the plan is a service plan and does not act as a warranty or insurance.
- Price and payment. Amount, monthly or annual, payment method, due date, and what happens on a failed payment.
- Scheduling. Who contacts whom to book visits, your service hours, and what happens to a visit the customer never schedules.
- Renewal. Whether the plan renews automatically, the renewal price or how it can change, and how much notice you give before renewal.
- Cancellation and refunds. How either side cancels, the notice required, and how refunds or charges for visits already performed are figured.
- Transfer. Whether the plan transfers to a new owner if the home sells.
- Access and safety. Customer provides safe access to equipment. You may decline work on unsafe equipment and will explain why in writing.
- Limits of liability and general terms. Wording your attorney provides for your state.
- Signatures and date. Customer and company, with a copy to the customer.
The complaint to prevent is the customer who thought the plan covered repairs. One clear sentence on the first page heads off that call.
How to sell maintenance agreements
Agreements are sold by techs in the home and by the office on the phone. Give both a script and a reason to use it.
- Offer it on every call. Present two prices on every repair ticket: the standard price and the member price. Let the customer see the plan pay for part of itself today.
- Offer it at booking. When someone calls for a tune-up, the office quotes the single visit and the plan side by side.
- Include it with every install. Add the first year to new system quotes. You get the renewal conversation in month eleven and you protect the equipment you installed.
- Pay a spiff. A small flat bonus per plan sold is enough. Track plans offered and plans sold by tech.
- Text past customers. A pre-season message to everyone you serviced in the last three years will sign up members cheaply. That is what a reactivation campaign is for.
- Put it on the website. A plan page with the price, the checklist and a sign-up button. See what the best HVAC websites do with it.
A simple tech script: "Your repair today is $420. Members pay $357 and get both tune-ups for the year. The plan is $19 a month. Do you want me to set that up and apply the member price?" The figures are an example.
Run the plan without dropping visits
A plan fails when visits get missed. Pick software that handles recurring billing and schedules the visits for you. Housecall Pro, for example, lists recurring service plans as a feature of its Max plan as of November 2026. Our Jobber vs Housecall Pro comparison and contractor CRM roundup cover the options.
- Book the next visit before the tech leaves the house.
- Send a text reminder three weeks ahead, one week ahead and the day before.
- Run a report each month of members with no visit in the last seven months, and call them.
- Send renewal notices on the schedule your agreement promises.
Where agreements fit in your marketing
Paid leads cost real money. A typical range for an exclusive HVAC repair lead in Ohio markets is $60 to $180, and $150 to $300 for a replacement lead. A member who stays five years costs you that once. Every ad dollar works harder when the first job turns into a plan. Our HVAC marketing page lays out the full channel plan, and HVAC leads covers how exclusive leads are generated.
Sources
- ENERGY STAR: Maintenance checklist (tune-up items, spring and fall timing, monthly filter checks)
- Housecall Pro pricing page (recurring service plans listed under the Max plan)
Checked November 2026. Programs and prices change; confirm on the company's own site.
