Paid ads

How Much Do Google Ads Cost for Contractors? Click and Lead Prices by Trade

Plan on $1,000 to $3,000 a month in Google Ads clicks for a small shop. Home-service clicks average about $8 and leads about $91 across the US, and typical exclusive lead costs in Ohio run from $25 for handyman work to $300 for a roof replacement.

How much do Google Ads cost: the short answer

How much do Google Ads cost depends on three numbers: what a click costs in your trade and town, how many clicks turn into calls, and how much you choose to spend. Google has no set price and no minimum. You set a daily budget and pay each time someone clicks.

For a benchmark, WordStream and LocaliQ publish yearly figures from US search campaigns. Their 2026 report, covering 13,474 campaigns from April 2025 through March 2026, puts the Home & Home Improvement category at an $8.33 cost per click, an 8.05% conversion rate and a $90.92 cost per lead. Across all 23 industries in the report the figures were $5.42 per click and $66.69 per lead. Home services run more expensive than the average business, and the report does not break the category out by trade.

A working rule for a small shop: plan on at least $1,000 a month in ad spend, paid to Google, plus management if you hire it out. Below that, most trades do not collect enough clicks to tell what is working.

Lead prices by trade

The table shows the typical ranges we work from for the cost of one exclusive lead in Ohio markets. A lead here means a phone call or form from a real prospect that goes only to you. These are working estimates. Bigger metros and peak season run higher.

The third column is arithmetic, and it is there to help you sanity-check your own account. It shows what a click would have to cost to land inside the lead range if one in ten clicks becomes a lead. Your own conversion rate will differ.

TradeTypical cost per exclusive leadClick price that implies at a 10% conversion rate
Roofing, replacement$150 to $300$15 to $30
Roofing, repair$60 to $140$6 to $14
HVAC, replacement$150 to $300$15 to $30
HVAC, repair$60 to $180$6 to $18
Plumbing$50 to $150$5 to $15
Electrical$45 to $140$4.50 to $14
Painting$40 to $120$4 to $12
Remodeling$120 to $350$12 to $35
Construction$120 to $400$12 to $40
Concrete$50 to $150$5 to $15
Flooring$45 to $130$4.50 to $13
Landscaping$35 to $110$3.50 to $11
Tree service$45 to $130$4.50 to $13
Junk removal$30 to $90$3 to $9
Pest control$30 to $90$3 to $9
Handyman$25 to $70$2.50 to $7

To see real click prices for your town, open Keyword Planner inside a Google Ads account, enter your main services, and set the location to your service area. Google says the tool estimates monthly searches for each keyword and the average cost for your ad to show on it. That is the closest thing to a price tag Google gives you before you spend.

What sets your click price

Google runs an auction every time someone searches. Your bid is the most you will pay for a click, and Google says what you actually pay is often less. Your position comes from Ad Rank, which Google builds from your bid, the quality of your ad and landing page, the context of the search, and how close the competing ads are. Four things move the price for a contractor:

  • Job value. Trades with big tickets bid more. A roof replacement click costs more than a gutter cleaning click because the job behind it is worth more to every bidder.
  • Competition in your town. A metro with dozens of advertisers costs more per click than a rural county with three.
  • Urgency words. Searches with "emergency", "24 hour" or "near me" often cost more because more advertisers want them.
  • Your ad and page quality. Ad and landing page quality are part of Ad Rank, so an ad that matches the search and a page that answers the question compete better at the same bid.

Season matters too. HVAC clicks climb in the first heat wave and the first cold snap. Roofing climbs after hail. Budget more for those weeks and less for the slow ones.

How the Google Ads budget works

You set an average daily budget for each campaign. Google's help page says that if you think in monthly terms, divide your monthly figure by 30.4 to get the daily number. A $1,500 monthly budget is about $49 a day.

Two rules surprise new advertisers:

  • A single day can run double. Google can spend up to twice your average daily budget on a busy day to make up for slow days.
  • The month is capped. Your charges for the month will not exceed 30.4 times the daily budget. Google's example: a $10 daily budget can spend up to $20 in a day and no more than $304 in a month.

So a $50 day that shows $94 of spend is normal. Judge the month, and check that the cap held.

Minimum workable budgets

A budget is workable when it buys enough clicks to produce leads every week. If it produces two leads a month, you cannot tell a good campaign from a lucky one. Aim for at least 10 to 15 leads a month from the campaign.

Trade typeTypical lead costWorkable monthly ad spendLeads that buys (example)
Low ticket: handyman, junk removal, pest control$25 to $90$1,00011 to 40
Service calls: plumbing, electrical, HVAC repair$45 to $180$1,500 to $2,5008 to 55
Planned work: painting, flooring, landscaping, tree, concrete$35 to $150$1,000 to $2,0007 to 57
High ticket: roof or HVAC replacement, remodeling, construction$120 to $400$2,500 to $5,0006 to 41

The lead counts are simple division of spend by lead cost, shown from the worst case to the best case. Your result will fall somewhere inside, and the first month usually sits near the expensive end while the campaign is being tuned.

If the budget is tight

Shrink the campaign and keep the spend. One service in one county with $1,000 behind it beats six services across four counties sharing the same money.

Sample monthly math

Here is an example with made-up numbers for an HVAC company running a repair campaign. Swap in your own figures.

  1. Ad spend: $2,000 for the month.
  2. Average click price: $12. That buys about 167 clicks.
  3. Conversion rate: 10% of clicks call or submit a form. That is about 17 leads at roughly $118 each.
  4. After listening to the calls, 13 are real prospects in the service area.
  5. The shop books 8 jobs.
  6. Average repair ticket: $450. Revenue: $3,600.
  7. Two of those 8 customers buy a replacement system within the year at $9,000 each. Revenue rises to $21,600.
  8. Add a $600 management fee. Total cost: $2,600. Cost per booked job: $325.

On repair tickets alone this month barely clears cost. With the replacements it pays several times over. That pattern is common in service trades: the ad buys a customer, and the customer is worth more than the first invoice. Decide what a new customer is worth to you over a year before you decide what a lead is allowed to cost.

You only get numbers like line 4 and line 5 if calls are tracked. See call tracking for contractors for the setup.

The costs beyond clicks

  • Management. If you hire an agency or freelancer, expect a monthly fee on top of ad spend. LeadGen's posted Google Ads management fees run $400 to $2,500 a month, with most small shops at $500 to $700. The pricing page has the full list. Whoever you hire, ask whether the account is in your name and whether ad spend is billed to you by Google directly.
  • A landing page. Clicks sent to a slow or generic page convert poorly, which raises your lead cost. See contractor websites.
  • Wasted clicks. Without a negative keyword list, part of every budget goes to job seekers and DIY searches.
  • Missed calls. A paid call that goes to voicemail is spend with no return.

If you are still deciding whether to start, read Is Google Ads worth it for a small contractor.

Sources

Checked November 2026. Programs and prices change; confirm on the company's own site.

FAQ

Questions

Is there a minimum spend for Google Ads?

Google does not set one. The practical floor for a contractor is about $1,000 a month, because smaller budgets rarely produce enough leads to judge the campaign.

Why did Google spend more than my daily budget?

Google can spend up to twice your average daily budget on a busy day. Over the month, your charges are capped at 30.4 times the daily budget.

Do I pay Google when someone calls from my ad?

You pay for the click on the call button, at the same rate as a click to your website. You do not pay extra based on how long the call lasts.

How long before Google Ads start producing leads?

Calls can start the first week. Expect 60 to 90 days of adjusting keywords, negatives and bids before the cost per lead settles.

Are Google Ads cheaper in small towns?

Usually. Fewer advertisers bid on each search, so clicks cost less. There are also fewer searches, so total lead volume is lower.

Should I pay an agency a percentage of ad spend?

Either model can work. A flat fee is easier to budget, and it removes any incentive to raise your spend. Ask for the fee in writing along with what is included.

Find out what a lead should cost in your zip code

The audit takes us a day. You'll get competitor spend, likely cost per lead and a plain recommendation, even if that recommendation is "don't run ads yet."

Get my free market audit
Call (877) 934-9998 Free audit