Paid ads

Facebook Lead Ads for Home Services: Setup and Follow-Up

Facebook lead ads open a pre-filled form inside Facebook or Instagram, so a homeowner can ask for a quote in two taps. The form is the easy part. Qualifying questions and a text within five minutes are what turn those leads into jobs.

What Facebook lead ads are

Facebook lead ads are ads with a form attached. Meta calls it an instant form. When someone taps the ad, the form opens inside Facebook or Instagram with their name, phone and email already filled in from what they have shared with Meta. They answer a question or two, tap submit, and you get the lead. They never visit your website.

For home services that has one big advantage and one big drawback. The advantage: forms that take ten seconds get filled out, so you collect leads at a lower cost than sending people to a web page. The drawback: forms that take ten seconds get filled out by people who are only half interested. The whole craft of lead ads is adding just enough friction to filter the form, then following up fast enough to catch the good ones. This guide covers both.

Set up the campaign

  1. Use your own accounts. The ad account and the Facebook Page should belong to your company. Meta's documentation states that all leads generated by a lead ad belong to the Page, so whoever controls the Page controls your leads.
  2. Choose the Leads objective in Ads Manager and pick instant forms as the place where leads are collected. Meta can also split delivery between your website and an instant form. Start with forms only so you can measure cleanly.
  3. Set the location to your real service area. Only include towns you will drive to.
  4. Keep the structure simple. One campaign, one ad set, three or four ads with different photos or videos. A common guideline among Meta advertisers is about 50 results per ad set per week for stable optimization. A local contractor budget will not reach that if it is split five ways.
  5. Use real job photos and one clear offer: a free inspection, a quote, a seasonal price.

For which offers suit which trades, see Facebook ads for contractors by trade.

Build the instant form

The form has a few parts. Here is how to set each for a home-service lead.

Form partOptionsRecommended setting
Form typeMore volume: quick to fill out and submit. Higher intent: adds a review screen where the person confirms their details before submitting.Higher intent. You lose some leads and keep the ones who meant it.
IntroHeadline, image and a short descriptionRestate the offer and say what happens next: "We will call within one business hour to schedule."
Contact fieldsPre-filled name, phone, emailAsk for full name and phone. Add email only if you will use it. Add a zip code or street address question for service-area checks.
Custom questionsMultiple choice, short answer, appointment request, conditional logicTwo or three questions. See the next section.
Ending screenA thank-you message with a button such as go to website or call businessUse the call button, and repeat when you will contact them.

One detail to check every time: the pre-filled phone number. People's Facebook profiles often carry an old number. Add a line in the intro asking them to confirm their best number, and the review screen on the higher-intent form gives them a second chance to fix it.

Qualifying questions that filter without killing volume

Each question you add cuts the number of leads and raises the quality of the ones left. Two or three is the right range for most trades. Make them multiple choice where you can, because tapping is easier than typing.

Ask things that change what you do next:

  1. Do you own the home? Yes, I own it. No, I rent. Renters usually cannot approve the work.
  2. What do you need? List your actual services so the lead lands with the right person and price range.
  3. When do you want the work done? As soon as possible. Within 1 to 3 months. Just getting prices.
  4. Trade-specific detail. One question that lets you prepare for the call.
TradeUseful fourth question
RoofingHow old is the roof? Under 10 years, 10 to 20, over 20, not sure
HVACHow old is your system? Under 10 years, 10 to 15, over 15
PaintingInterior, exterior or cabinets?
LandscapingWhat kind of project? Patio, planting, lawn care, drainage, other
RemodelingRough budget range, in three or four brackets
PlumbingWater heater type: tank or tankless, gas or electric
Junk removalAbout how much? A few items, a pickup load, a full garage or more

Instant forms also support conditional logic, where an answer decides which question or ending comes next. With it you can route a non-fit answer, such as "I rent", to a polite closing screen, and that person's contact details are not submitted as a lead. It takes more setup. Add it once the basic form is working.

Short answer beats nothing

One typed question, such as "Briefly, what is going on?", screens out a lot of accidental submissions. People who will not type six words rarely answer the phone.

Get the lead out of Facebook immediately

A lead that sits in Meta until someone remembers to download it is a dead lead. Meta's documentation lists the ways to get leads out:

  • Leads Center in Meta Business Suite, where you can view and download leads by hand.
  • A CRM integration, through a supported partner or a connector, that pushes each lead into your system as it arrives.
  • Webhooks and the API, which notify your software in real time. This is what the connectors use behind the scenes.

Use an integration. The lead should land in your CRM, text thread or inbox within seconds, and it should trigger an alert on a phone that someone is holding. Send a test lead through your own form before you spend a dollar, and confirm it arrives where you expect. If your CRM can report back to Meta which leads became jobs, set that up later. Meta can use that feedback to find better leads.

Follow-up: the instant text-back

Facebook leads go cold fast. The person was scrolling, tapped a form, and went back to scrolling. The follow-up needs to arrive while they still remember doing it.

A schedule that works:

  1. Within 1 minute: automatic text. "Hi [Name], this is [Your name] with [Company]. Got your request for a [service] quote. I will call you in a few minutes from this number. If now is bad, text me a better time."
  2. Within 5 minutes: call. From the same number the text came from. If no answer, leave a short voicemail and send a second text: "Just tried you. What is a good time today?"
  3. Same day: second call at a different time of day.
  4. Day 2 and day 4: call and text again.
  5. Day 7: last message. "Still want a price on that [service]? If the timing is off, no problem. Reply LATER and I will check back next month."
  6. After that: move them to a monthly check-in list. Many will be ready in a season or two.

Rules for the texts: use the person's first name, name your company, mention the exact service they asked about, and send from a local number a human will answer. Only text people who gave you their number through the form for this purpose, and stop when they ask you to. Text marketing has consent rules, so have your form's disclosure wording and your texting practices checked against current regulations.

The same automation that handles new leads can work your old ones. See missed call text back and speed to lead for the wider follow-up system, and database reactivation for past customers.

Measure the right number

Cost per lead is the number Meta shows you. It is the wrong one to manage by. Track each lead through four steps: submitted, reached, estimate set, job sold.

An example with made-up numbers for a painting company:

  • $600 in spend, 24 leads. Cost per lead: $25.
  • 15 reached by phone or text. Cost per reached lead: $40.
  • 8 estimates set. Cost per estimate: $75.
  • 3 jobs sold at an average of $4,200. Cost per job: $200.

If the reach rate is low, the fix is follow-up speed or the phone number field. If reached leads will not set estimates, the fix is in the form questions or the offer. If estimates do not close, that is a sales issue and no ad change will solve it.

LeadGen builds and manages lead ad campaigns as part of its Meta ads service, including the form, the lead delivery and the text-back. If you want to see how Meta would fit beside search in your market, start with the free market audit.

Sources

Checked November 2026. Programs and prices change; confirm on the company's own site.

FAQ

Questions

Are Facebook lead ads better than sending people to my website?

Lead forms usually bring more leads at a lower cost each, and website forms usually bring fewer, more serious ones. Start with lead forms if your follow-up is fast, and test a landing page later.

How many questions should a lead form have?

Name, phone and two or three qualifying questions. More than that and completion drops.

Where do my Facebook leads go?

They are stored with your Facebook Page and can be viewed in Leads Center in Meta Business Suite. Connect a CRM or connector so each lead reaches you the moment it is submitted.

Why do so many Facebook leads not answer the phone?

The form is pre-filled, sometimes with an old number, and people forget they submitted it. A text within a minute that names your company and the service fixes much of this.

Do lead ads show on Instagram too?

Yes. Lead ads with instant forms can run on both Facebook and Instagram from the same campaign.

Find out what a lead should cost in your zip code

The audit takes us a day. You'll get competitor spend, likely cost per lead and a plain recommendation, even if that recommendation is "don't run ads yet."

Get my free market audit
Call (877) 934-9998 Free audit