What a hail map shows and what it cannot tell you
A hail map is a map of where hail fell during a storm, usually with an estimate of stone size. Roofers use it to decide where to send inspectors, where to aim ads and which past customers to call first. You can build a usable one from free National Weather Service and NOAA data the morning after a storm.
Every hail map comes from one of two kinds of data. The first is ground reports: a spotter, police officer or homeowner saw hail and reported the size. The second is radar estimates: software looks at the radar return and estimates where hail probably fell. Ground reports are real but spotty. Radar estimates cover every street but are an estimate. A map never proves a roof is damaged. Only an inspection does that.
The National Weather Service defines a severe thunderstorm as one capable of producing hail an inch or larger, which is quarter size. That 1 inch line is a reasonable first filter for where to look. Smaller hail can still mark up an older roof, soft metals and siding, so treat the map as a place to start inspecting.
Where to get hail map data for free
These are the public sources we checked. Each does a different job.
| Source | What it gives you | Speed | Best use |
|---|---|---|---|
| NWS Local Storm Reports, viewed in the Iowa Environmental Mesonet LSR app | Ground reports on a map and in a table: time, type, magnitude, city, county and state. Filter by state, weather office, date range, report type and magnitude. Export to Excel, KML, shapefile or GeoJSON. | Same day | First look the morning after. Confirms hail was seen on the ground and how big. |
| NOAA NCEI Severe Weather Data Inventory (SWDI) | Radar-detected hail signatures from NEXRAD, searchable by time period and area. Interactive map, bulk CSV download and a web service. Formats include shapefile, KMZ, CSV and XML. | Radar based | Filling the gaps between ground reports and drawing the swath. |
| NOAA NCEI Storm Events Database | The official record of hail, wind, tornado and flood events gathered by the National Weather Service, with hail size in inches. Searchable, with bulk CSV download. | Updated 75 to 90 days after the month ends | History. Proving a storm date for a claim, or finding neighborhoods hit in past years. |
| NOAA NSSL Multi-Radar/Multi-Sensor system (MRMS) | Blends many radars with other sensors into severe weather products, including hail products, at roughly 1 km detail. NSSL says the product suite is publicly available. | Updates every couple of minutes | The raw material behind many commercial hail maps. Useful if you have someone technical on staff. |
Two cautions from NOAA itself. NCEI says the radar-derived data in SWDI reflects probable conditions and is not confirmed, and that missing data does not mean no severe weather occurred. NCEI also says hail size in the Storm Events Database is based on appearance, such as "golf ball", and is not measured, and that some reports come from unverified outside sources.
Paid hail map services exist and mostly repackage radar data into street-level swaths with address lists. They save time. Ask any vendor what data the swath comes from, how soon after a storm it posts, and whether you can export by zip code before you pay.
How to read hail size
Reports use object sizes. NOAA's National Severe Storms Laboratory lists these diameters:
- Pea: 1/4 inch
- Penny: 3/4 inch
- Quarter: 1 inch (the severe threshold)
- Ping-pong ball: 1 1/2 inches
- Golf ball: 1 3/4 inches
- Tennis ball: 2 1/2 inches
- Baseball: 2 3/4 inches
Sort your reports by size. A cluster of 1 inch and larger reports along a line is your swath. A single report with nothing around it deserves a drive-by before you spend money on it.
Turn the hail map into a zip code list
- Pull ground reports. The morning after, load your state and the storm's date range in the LSR app. Filter to hail and to 1 inch or larger. Export the table.
- Draw the swath. Plot the reports on a map. Add radar hail signatures from SWDI to connect the dots. You are looking for a band, often a few miles wide, along the storm's track.
- List the zip codes under it. Lay a zip code map over the swath and write down every zip that sits mostly inside it.
- Rank the zips. Put zips first where you already have customers and reviews, where the homes are old enough to need a roof, and where your crews can reach in under 45 minutes.
- Verify on the ground. Send one person to drive the top three zips. Look for dented mailboxes, gutters and AC fins, and spatter on fences. If you see none, drop that zip.
- Launch only in verified zips. Three zips you can service beat fifteen you cannot.
Homeowners search hardest in the first few days after a storm. Have the ad copy, landing page and text templates written before storm season so launch day is a matter of pasting in zip codes.
Build the storm campaign by zip code
Storm damage leads come from four places. Run them together in the same zips.
- Google Search. Google Ads lets you target regions, cities or postal codes, so you can limit a campaign to the zips on your list. Bid on "hail damage roof inspection", "roof repair" and "roof replacement" terms, and send clicks to a page that names the storm date and the towns hit. See Google Ads for roofers for campaign structure.
- Past customers. Text and call every past customer in the affected zips and offer a free inspection. This is the cheapest lead you will get all year. A database reactivation campaign does this in a day.
- Social ads. Run a short video from an actual roof in the area with an inspection offer. Keep the radius tight around the swath.
- Doors and signs. Put yard signs on every job and door hangers on the neighbors. Our guide to yard signs and door hangers covers what to print.
As a typical range in Ohio markets, exclusive roof replacement leads from search run $150 to $300 each, and repair leads $60 to $140. Expect click prices to climb in the weeks after a storm as more roofers bid. Put a tracking number on each channel so you know which one booked the inspections. Call tracking for contractors explains the setup.
Compete with out-of-town storm chasers
After a big storm, traveling crews show up and knock doors. Homeowners search for "storm chasers roofing" to figure out who to trust. A local roofer has real advantages. Use them in every ad and on every door.
- Show your local address, your license or registration number and your years in the area.
- Show local reviews and photos of jobs in the same town.
- Put your warranty in writing and say who the homeowner calls in three years.
- Answer the phone fast. Storm leads go to whoever inspects first. See speed to lead.
Before you canvass, check each town's solicitation permit rules and your state's rules on door-to-door sales contracts and insurance claim work. Have your attorney review your contract and any contingency agreement.
Get ready before the storm
Roofers who win storm work set up in the off season. Build the landing page now with a blank for the storm date. Write three ads and two text messages. Export your customer list with zip codes. Decide your maximum daily spend. Then the day after hail, you pull the map, pick the zips and switch it on. If you want exclusive roofing leads in your market year-round, see how our roofing leads program works, or read the full roofing marketing plan.
Sources
- National Weather Service: Thunderstorm safety (severe thunderstorm defined by hail an inch or larger)
- NOAA NSSL: Severe Weather 101, Hail (hail size comparisons, quarter size as severe)
- Iowa Environmental Mesonet: Local Storm Report app (report fields, filters and export formats)
- NOAA NCEI: Severe Weather Data Inventory (NEXRAD hail signatures, formats, access and caveats)
- NOAA NCEI: Storm Events Database FAQ (contents, update delay, how hail size is recorded)
- NOAA NSSL: Multi-Radar/Multi-Sensor system (what MRMS is, resolution, update cycle, public availability)
- Google Ads Help: Target ads to geographic locations (targeting by region, city or postal code)
Checked November 2026. Programs and prices change; confirm on the company's own site.
